Servo controller

Description

SERVO CONTROLLER
- manual servo controller with LED indication
- the module commands 4 servos with 4 pushbuttons between 0 - 180 degrees
- the adjustable maximum angle of a servo with four onboard potentiometer
- adjustable speed of servos (one potentiometer for all servos)
- store positions of servos in the memory (remembers the last position after the power switch
off)
- output for 8x LEDs, or 4x Bi-polar LEDs
- LEDs show the position of the servo; you will always know in which position the servo arm is
- examples of using: if the LED is green the servo-controlled turnout is in the straight position, if the LED is red it is in the divergent position
- suitable for manual control of turnouts, semaphores, moving any kind of arms, doors, barriers
- push the button to move the servo into one direction (clockwise), and push once again to move the servo to the opposite direction (counterclockwise)
- recommended power supply: 10-15V AC/DC
The package includes:
- tested Servo controller board
- 8x 1.5 kOhm resistors
- 8x 3mm LED diodes (4x red and 4x green or yellow)
If you would like different colors, please let me know. Available colors: red, green, yellow, white, bipolar LED green/red.
A short video about how it works:
here
(soon!)
Download manual (and other modules
):
https://www.dcc-decoders.com/manuals