-40%
BECKETT AF/AFG OIL BURNER CHASSIS (LESS AIR TUBE) B3001
$ 282.48
- Description
- Size Guide
Description
BECKETTAF/AFG
OIL BURNER
(LESS AIR TUBE)
B3001
AF/AFG Oil Burner
The AF & AFG burners utilize the most technically advanced components to meet the performance requirements of high efficiency equipment and meet the demands of biofuels to reduce emissions and meet carbon reduction goals. The AF/AFG burners are certified for traditional home heating oils, biodiesel blends to 20% (B20) and Renewable Diesel blends to 95% (R95) to give consumers reliable performance while reducing the carbon footprint of your heating system.
Capacities
0.40 to 3.00 gph
56,000 to 420,000 BTU/hr input
Fuels
ASTM D396 for #1 & #2 Heating Oil
ASTM D396 for B6 – B20 biodiesel blends
D975 for Renewable Diesel to 95% (R95)
Dimensions (standard)
Height:
11½”
Width:
12⅞”
Depth:
6
9
/
16
“
Electrical Characteristics
Power Supply:
120VAC / 60Hz / 1 Phase
Motor
: Permanent Split Capacitor (PSC) 3450 rpm, NEMA M-Flange
Ignition
: Solid State, rated for continuous duty. Uses 75% less energy than traditional ignition transformers
Operating Load
: 5.8 Amps @ 120VAC
Alternate Voltages / Frequencies:
Contact Customer Service for availability
Fuel Unit
Beckett CleanCut
®:
Single or Two Stage standard
Alternates available – special order
Chassis Plan
Models to meet most retrofit applications. Consult your heating professional for specific application information.
Replacement chassis carry new burner warranty and current fuel certifications. See Warranty section for additional information.
Performance Capabilities
Nozzle Line Electrode Assembly
– Self-centering, delivers oil to the nozzle, high voltage electricity to the electrodes; static plate controls and evens out air flow to the head for smooth, efficient combustion.
Flame Retention Head
– One-piece flame retention burner head. Highly stable and intense combustion increases efficiency by as much as 35%.
Drive Motor
– Continuous duty, permanent split capacitor, built for daily hard use and years of trouble-free operation. Overload protection included.
Ignition Transformer
– 10,000 V/23 mA secondary positively and smoothly ignites fuel. Electrically balanced and shielded. No TV interference. Designed for heavy duty continuous operation.
Connector Tube Fitting
– Special Beckett, high quality flare fitting.
Burner Housing
– Sturdy die cast, precisely machined aluminum housing aligns pump and motor for smoothest operation and longest coupling life.
Order Burner Chassis
Model AF Burner Chassis
Type of Fuel Unit
Primary Control
Order Air Tube Combination
Air Tube Length (dimension A) and Firing Rate or Air Tube Combination Code (see table).
Order Accessories
Specify mounting requirement – Flanges and pedestals listed below
Sound Cover available – see Product Sheet
Outside Air Kits available – see Product Sheet or your heating professional
Spare parts, related controls, etc.
Air Tube Combination Chart
Firing Rate
Min-Max (G.P.H.)
Burner Head
Usable Air Tube Length “A”
4½”
5⅜”
6⅝”
7¼”
9″
10½”
13″
16″
Less Head
Less
AF44
AF53
AF65
AF72
AF90
AF104
AF130
AF160
0.40-0.75
F0
AF44XR
AF53XR
AF65XR
AF72XR
AF90XR
AF104XR
AF130XR
AF160XR
0.75-1.25
F3
AF44XN
AF53XN
AF65XN
AF72XN
AF90XN
AF104XN
AF130XN
AF160XN
0.85-1.65
F6
AF44YB
AF53YB
AF65YB
AF72YB
AF90YB
AF104YB
AF130YB
AF160YB
1.10-2.00
F12
AF44XO
AF53XO
AF65XO
AF72XO
AF90XO
AF104XO
AF130XO
AF160XO
1.65-2.50
F22
AF44XP
AF53XP
AF65XP
AF72XP
AF90XP
AF104XP
AF130XP
AF160XP
2.50-3.00
F31
AF44XS
AF53XS
AF65XS
AF72XS
AF90XS
AF104XS
AF130XS
AF160XS
To Determine Air Tube Length
The Air tube Length (Dimension A) is the distance from the front of the burner housing to the end of the air tube.
Adjustable Mounting Flange Kit
No. 5850 or 5432 Adjustable Mounting Flange Kit
No. 5850 is a two-piece split flange. No. 5432 is a one-piece flange. Both kits include a flange mounting gasket.
Optional Supports
No. 5685 Pedestal Kit
– For conversion applications where no mounting flange is required.
No. 5606 Pedestal Kit Extended
– Provides elevation from 8¼” to 13″.
Flame Retention Heads