6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids

Description

6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids
6009 Epoxy Concrete Floor Coating is 100% Solids
6009 epoxy floor coating is an attractive all purpose low temperature, high build commercial grade epoxy designed to be extremely tough, durable impact and abrasion resistant with very good chemical resistance to corrosive waters and other chemicals. It is a 100% solids, 2:1 ratio plural component, self priming, no VOC, extremely tough advanced polymer structure.
The 6009 is used to protect garage, show room, industrial floors, and general work areas. Can be applied up to 32 mils thick (50 sq'/gallon) down to 35F and rising (note: cold temps will significantly extend recoat and back in-service times)
Coverage rate for 6009 depends on how thick applied. At 100% solids, nothing lost to evaporation after it dries (compare to 50% solids epoxy at big box stores which lose 1/2 of material in container to evaporation). For 5 mil thick application, 6009 coverage rate is 320 sq’/gallon or 960 sq’ total area with 3 gallon kit. This is fine for basement or light foot traffic only projects. For garage floors recommended 10 mils minimum (160 sq'/gallon) epoxy basecoat thickness.
One 3 gallon kit of 6009 protects most 2 car garages, covering 480 sq’ at 10 mils thick in a one coat application (applied at 160 sq'/gallon). For additional abrasion and chemical protection, recommend our
5500 Polyaspartic
as a clear, high gloss, UV resistant protective topcoat. One 2 gallon kit of 5500 Polyaspartic Clear is all you need as a topcoat for a 480 sq', 2 car garage.
When applying chips/flakes can apply them to the colored 6009 basecoat and then topcoat with a clear version of either the 6009 or 5500. Using a clear topcoat over a colored basecoat also adds depth to the visual appearance and enhances the look. If a primer is needed, see our companion
7001 Polyurethane Primer.
The 6009 can also be used as an effective outdoor concrete patch repair. Mix with sand, 2 parts sand + 1 part 6009 and when applied it will meet or exceed strength of surrounding concrete. One 3 gallon kit of 6009 mixed with sand will fill 1,410 cubic inches (23,100 cubic cm) of a hole or crack.
Comes in high gloss clear or 6 color options in 3 gallon & 15 gallon kits. See How to Apply tab for application instructions.
Where is 6009 typically used?
Industrial floors
Warehouse floors
Show room floors
Garage floors
Basements
General work areas
Why 6009 Epoxy Floor Coating?
Protective and attractive color coat epoxy flooring system
Designed to seal floors against abrasion, water, oils and chemicals
Good Color stability
Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
Quick re-coat time 4-5 hours (at 75F)
Self Priming With No Primer Required
100% solids, 2 part, no VOC, low odor
Excellent protective coating at low cost per Mil DFT (dry film thickness)
TECHNICAL DETAILS
Solids
100%
Color
Black, Dark Gray, Light Gray, Tan, white
Hardness Shore DIN 53505
D 70
Gel time
30 -60 min
Recoat Time
4-5 hours at 75F. Varies with temperature & humidity
Solids
100%
Mix ratio
2:1
Application method
Notched trowel or squegee, roller
Surfaces Applied to
Concrete, metal, wood
Solids
100%
Hardness Shore DIN 53505
D 70
Application Temperature
35°F to 125°F (air and surface) and 5°F above dew point
Tensile Strenghth (GPa)
52
Flexural Strength (MPa)
94
Carbamation Test (scale 1 to 5)
5
Viscosity @75°F cps
350-600
Concrete cure time
Minimum 28 days after new pour
Color
Size
Price
White
3 Gallon Kit
$
291.50
White
15 Gallon Kit
$
1,386.00
Black
PART A ONLY (1 GALLON)
$
110.00
Clear
PART B ONLY (1 GALLON)
$
110.00
Dark Gray
PART A ONLY (1 GALLON)
$
110.00
Light Gray
PART A ONLY (1 GALLON)
$
110.00
Wheat (Light Tan)
PART A ONLY (1 GALLON)
$
110.00
Clear
PART A ONLY (1 GALLON)
$
110.00
Wheat (Light Tan)
3 Gallon Kit
$
291.50
Black
3 Gallon Kit
$
291.50
Light Gray
3 Gallon Kit
$
291.50
Dark Gray
3 Gallon Kit
$
291.50
Clear
3 Gallon Kit
$
280.50
Shipping
Shipping cost:
No cost shipping lower 48 US States FedEx Ground
Delivery time:
Delivery 1 to 5 days after shipment depending on location
Payment
We accept the following payment methods:
PayPal payment due at time of order placement
Please contact us if you have any questions.
Service
PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS